Power quality analysis, periodic inspection, flue gas measurement and greenhouse gas reporting: one team for the electrical and energy infrastructure of your facility. On-site service across the Aegean Region.
Twelve service lines, each shown with the unit of measurement its report is based on. Recommendations rest on field measurements, not estimates.
Preparations are underway for building and industrial energy audits under Law No. 5627: efficiency improvement projects, feasibility, TOE and CO₂ reduction calculations.
Certified outsourced energy management under Law No. 5627: consumption monitoring, periodic reporting and continuous efficiency recommendations.
Harmonics, flicker and voltage-event analysis with the Kyoritsu KEW 6315; load profiling, demand analysis and TS EN 50160-compliant reporting.
Corporate greenhouse-gas inventory under ISO 14064-1 (Scope 1-2-3), verification-ready carbon footprint reporting and reduction roadmaps.
O₂, CO and CO₂ measurement, excess-air ratio determination, combustion efficiency and stack-loss analysis, boiler-burner optimization.
Air velocity, flow and thermal comfort measurements; duct and diffuser flow balancing, air handling unit and fan performance analysis.
Earthing measurements compliant with the Turkish Earthing Regulation (below and above 1 kV), RCD testing, lightning protection and fire detection system checks.
Insulation resistance and PAT testing with the KEW 6516; grid-related fault diagnosis with the KEW 6315, hot-spot detection with thermal imaging.
Transformer substation, switchgear and panel design; busbar and earthing installations, protection relay commissioning, testing and reporting.
Chamber-certified high-voltage operation responsibility for installations above 1 kV: switching instructions, periodic site inspections and utility liaison.
Design and installation of reactive power compensation systems, reactive power monitoring, harmonic filter systems for equipment protection.
Utility- and chamber-approved application projects; short-circuit, voltage-drop, cable sizing and protection calculations.
Smart-meter (OSOS) readings are loaded into the portal daily. Monthly consumption, maximum demand and reactive ratios on one screen, with an alert when a limit is exceeded. The Recommendations section evaluates your supply contract, tariff term, reactive penalty risk and invoice consistency using your own data. The portal interface is in Turkish.
Başkurt Engineering is an electrical and energy engineering practice founded in Ayvalık in 1992. With engineers registered with the Turkish Chambers of Electrical and Mechanical Engineers (EMO, MMO), it provides measurement, analysis, operation responsibility and design services to industrial and commercial facilities across the Aegean Region.
Assessments rest on field measurements: power analyzer, thermal camera, flue gas analyzer and HVAC measurement set. Every recommendation is reported with its expected saving and payback period.
Energy efficiency, ISO 14064 greenhouse gas inventories, MV/LV installations, HV operation responsibility and switchgear supply are handled by the same team. A need identified in an audit is followed through to design and equipment selection.
The team combines electrical and industrial engineering; field experience dating back to 1992 is paired with current measurement equipment. ISO 14064 Lead Auditor authorization and EMO/MMO registration are in place.
Reach us by e-mail or phone for quotes and technical questions.
| Monday – Friday | 09:00 – 17:00 |
| Saturday | 09:00 – 12:00 |
| Sunday | CLOSED |